BANNER.jpg (60050 bytes)
JEEP Model Identification Guide

jeep_tj.jpg (20942 bytes)
2000' TJ Sahara Edition

JEEP TJ "WRANGLER" ( What mine is Duh... )

Production: (1997- 2006)
Identifying Characteristics: Round headlights, tailgate opens to side, with spare tire. windshield hinges are flush with body and frame. Plastic cap ends on bumpers.
Windshield Width: 55”.
Suspension:
Coil spring suspension front and rear. (the FIRST time coils were used)
Wheel Bolt Pattern: 5x4.5”
Wheelbase: 93.4 inch

jeep_yj.jpg (25982 bytes)
1994 YJ

JEEP YJ "WRANGLER" ( My first Jeep.. SOLD! )

Production: (1987-1991) & (1992- 1996)
Identifying Characteristics:
Rectangular headlights, tailgate opens to side, squared off rear sport bar support.
Windshield Width: 55”.
Suspension: Leaf spring suspension, front and rear.
Wheel Bolt Pattern: 5x4.5”
Wheelbase: 93.4 inch

jeep-cj7.jpg (27053 bytes)

JEEP CJ7 - "GOLDEN EAGLE, SCRAMBLER & RENEGADE"

Production: (1976-1986)
Identifying Characteristics: Round headlights, tailgate opens down, bottom mount windshield wipers, and factory sport bar.
Windshield Width: 55”.
Suspension: Leaf spring suspension, front and rear.
Wheel Bolt Pattern: 5x5.5”
Wheelbase: 93.5 inch

jeep_cj8.jpg (32423 bytes)

JEEP CJ8 / SCRAMBLER (TRUCK BED VERSION)

Production: (1982- 1986)
Identifying Characteristics: Extended version of the Jeep CJ7, available as mini pick-up half cab, or full cab.
Windshield Width: 55”.
Suspension: Leaf spring suspension, front and rear.
Wheel Bolt Pattern: 5x5.5”
Wheelbase: 103.5 inch

Jeep CJ5

JEEP CJ5 (2nd generation)

Production: (1976-1983)
Identifying Characteristics: Round headlights, bottom mount windshield wipers, and factory sport bar.
Windshield Width: 55”.
Suspension: Leaf spring suspension, front and rear.
Wheel Bolt Pattern: 5x5.5”
Wheelbase: 83.5 inch.

Jeep CJ5/CJ6

JEEP CJ5/CJ6 (1st generation)

Production: (1955-1975)
Identifying Characteristics: Round headlights, bottom mount windshield wipers, and windshield near straight up.
Windshield Width: 59”.
Suspension: Leaf spring suspension, front and rear.
Wheel Bolt Pattern: 5x5.5”
Wheelbase: 80.5 inch thru 1971, 1972 and later 83.5 inch

Jeep CJ6

JEEP CJ6

Production: (1955-1975)
Identifying Characteristics: Extended version of the Jeep CJ5. Round headlights, bottom mount windshield wipers, and windshield near straight up.
Windshield Width: 59”.
Suspension: Leaf spring suspension, front and rear.
Wheel Bolt Pattern: 5x5.5”
Wheelbase: 100.5 inch thru 1971, 1972 and later 103.5 inch.

Jeepster-Commando

JEEP C101/C104 JEEPSTER and COMMANDO

Production: (1966-1973)
Identifying Characteristics: Round headlights, Jeep CJ style grille with wide hood thru 1971, 72/73 non-typical, full width grille design Available as full or half cab in either steel or fabric, and as convertible.
Windshield: Flat Glass fixed 59”.
Suspension: Leaf spring suspension, front and rear.
Wheel Bolt Pattern: 5x5.5”
Wheelbase: 101 inch thru 1971, 1972 and 1973 104 inch.

jeep-cj3b.jpg (46606 bytes)

JEEP / WILLYS CJ3B

Production: (1953-1964)
Identifying Characteristics: Flat fenders, with a tall hood 10.5 inches one piece windshield. Bottom mount windshield wipers. Side mounted spare tire.
Drivetrain: "Hurricane" F-head, 134 cu.in. (2.2 liter), 4 cylinders
Transmission: Borg-Warner T-90
Transfer case: Dana 18/ Spicer 18
Windshield Height: 22.5 inches
Suspension: Leaf spring suspension, front and rear.
Wheel Bolt Pattern: 5x5.5”
Wheelbase: 80 inch.

jeep_cj3a.jpg (14773 bytes)

JEEP / WILLYS CJ3A

Production: (1948-1953)
Identifying Characteristics: Flat fenders, one-piece windshield with vent. Bottom mount windshield wipers. Side mounted spare tire.
Drivetrain: "Go-Devil" L-Head 4-cylinder in-line watercooled side-valve gasoline engine developing 60 bhp at 4000 rpm and a max. torque of 105 lb-ft at 2000rpm Cubic capacity 134.2 in. (2199 cc).
Transmission: Borg-Warner T-90
Transfer case: Dana 18/ Spicer 18
Windshield Height: 27 inches.
Suspension: Leaf spring suspension, front and rear.
Wheel Bolt Pattern: 5x5.5”
Wheelbase: 80 inch.

jeep-cj2a.jpg (10594 bytes)

JEEP / WILLYS CJ2A

Production: (1946-1948)
Identifying Characteristics:
Flat fenders, two-piece swing out windshield. Top mount windshield wipers. Side mounted spare tire.
Drivetrain: "Go-Devil" L-Head 4-cylinder in-line watercooled side-valve gasoline engine developing 60 bhp at 4000 rpm and a max. torque of 105 lb-ft at 2000rpm Cubic capacity 134.2 in. (2199 cc).
Transmission: Borg-Warner T-90
Transfer case: Dana 18/ Spicer 18
Windshield Height: 25 inches.
Suspension: Leaf spring suspension, front and rear.
Wheel Bolt Pattern: 5x5.5”
Wheelbase: 80 inch.

jeep-mb.jpg (18114 bytes)

JEEP / WILLYS MB

Production: (1941-1945)
Identifying Characteristics:
Flat fenders, two-piece swing out windshield. Top mount windshield wipers. Side mounted spare tire.
Drivetrain: Willys model 441 or 442 "Go Devil" 4-cylinder in-line watercooled side-valve (L-head) gasoline engine, developing 60 bhp (54net) at 4000 rpm and a max. torque of 105 lb-ft (95 net) at 2000rpm Cubic capacity 134.2 in. (2199 cc).
Transmission: Borg and Beck model 11123
Transfer case: Dana 18/ Spicer 18
Windshield Height: 25 inches.
Suspension: Leaf spring suspension, front and rear.
Wheel Bolt Pattern: 5x5.5”
Wheelbase: 80 inch.